LNK306GN是一款可應(yīng)用于LED恒流驅(qū)動芯片,POWER原裝進口,東森微電子專業(yè)代理,大量現(xiàn)貨.
LNK302/304-306 LinkSwitch-TN Family Lowest Component Count, Energy-Effi cient Off-Line Switcher IC Figure 1. Typical Buck Converter Application (See Application Examples Section for Other Circuit Confi gurations). Product Highlights Cost Effective Linear/Cap Dropper Replacement • Lowest cost and component count buck converter solution • Fully integrated auto-restart for short-circuit and open loop fault protection – saves external component costs • LNK302 uses a simplifi ed controller without auto-restart for very low system cost • 66 kHz operation with accurate current limit – allows low cost off-the-shelf 1 mH inductor for up to 120 mA output current • Tight tolerances and negligible temperature variation • High breakdown voltage of 700 V provides excellent input surge withstand • Frequency jittering dramatically reduces EMI (~10 dB) – minimizes EMI fi lter cost • High thermal shutdown temperature (+135 °C minimum) Much Higher Performance over Discrete Buck and Passive Solutions • Supports buck, buck-boost and fl yback topologies • System level thermal overload, output short-circuit and open control loop protection • Excellent line and load regulation even with typical confi guration • High bandwidth provides fast turn-on with no overshoot • Current limit operation rejects line ripple • Universal input voltage range (85 VAC to 265 VAC) • Built-in current limit and hysteretic thermal protection • Higher effi ciency than passive solutions • Higher power factor than capacitor-fed solutions • Entirely manufacturable in SMD EcoSmart®– Extremely Energy Effi cient • Consumes typically only 50/80 mW in self-powered buck topology at 115/230 VAC input with no load (opto feedback) • Consumes typically only 7/12 mW in fl yback topology with external bias at 115/230 VAC input with no load • Meets California Energy Commission (CEC), Energy Star, and EU requirements Applications • Appliances and timers • LED drivers and industrial controls Description LinkSwitch-TN is specifi cally designed to replace all linear and capacitor-fed (cap dropper) non-isolated power supplies in the under 360 mA output current range at equal system cost while offering much higher performance and energy effi ciency. ® LinkSwitch-TN devices integrate a 700 V power MOSFET, oscillator, simple On/Off control scheme, a high voltage switched current source, frequency jittering, cycle-by-cycle current limit and thermal shutdown circuitry onto a monolithic IC. The startup and operating power are derived directly from the voltage on the DRAIN pin, eliminating the need for a bias supply and associated circuitry in buck or fl yback converters. The fully integrated auto-restart circuit in the LNK304-306 safely limits output power during fault conditions such as short-circuit or open loop, reducing component count and system-level load protection cost. A local supply provided by the IC allows use of a non-safety graded optocoupler acting as a level shifter to further enhance line and load regulation performance in buck and buck-boost converters, if required. |